Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
wallpaper Tiesto II - Wallpapers
breddy2000
03-09 09:09 AM
Wow,
at first glance it seems 245(i) is kicking in real hard.
Look at EB-3 numbers for Mexico, Phillipines, Pakistan, South Korea, Guatemala, Brazil, Equador, Peru, Poland, El Salvador, Bolivia, Ecquador,
Compare this with H1-B data and you'll see what I mean.
Also EB-1 seems unusually high at ~37,000
EB-1 is even higher than EB-2
isn't that unusual?
I think most of the EB1 category for India is being used up by the L1-A visa holders who are Multinational Executives.
The place I work has so many people from Big Indian companies and they have applied in EB-1 category and got their GCs in less than a Year.
I strongly feel L1-A visa holders shud not be put in EB-1 category.
What do you think.
at first glance it seems 245(i) is kicking in real hard.
Look at EB-3 numbers for Mexico, Phillipines, Pakistan, South Korea, Guatemala, Brazil, Equador, Peru, Poland, El Salvador, Bolivia, Ecquador,
Compare this with H1-B data and you'll see what I mean.
Also EB-1 seems unusually high at ~37,000
EB-1 is even higher than EB-2
isn't that unusual?
I think most of the EB1 category for India is being used up by the L1-A visa holders who are Multinational Executives.
The place I work has so many people from Big Indian companies and they have applied in EB-1 category and got their GCs in less than a Year.
I strongly feel L1-A visa holders shud not be put in EB-1 category.
What do you think.
arnet
11-22 06:31 PM
hey nivasch, can you use H1 to work if you didnt use it to enter at port of entry? can you please explain your experience? thanks.
Arnet
Arnet
2011 Tiesto Wallpapers. Download
jonty_11
12-26 11:44 AM
Just allowing filing of I-485 while You are retrogressed, is a boon, so u can get EAD and are allowed to change Jobs in the Same profession
more...
saketkapur
10-28 10:55 AM
Please talk to a good immigration attorney.....following is just my opinion and do not take it as legal advice as every case is different.
If you have filed for AOS and are past the 6 month mark, have a valid EAD then you can invoke AC21 and change jobs.
Else your new company will most probably have to file a fresh labor and I-140 for you however you should be able to port or re-capture your PD.....
Again talk to a lawyer or post in the lawyer portal.........
best of luck
If you have filed for AOS and are past the 6 month mark, have a valid EAD then you can invoke AC21 and change jobs.
Else your new company will most probably have to file a fresh labor and I-140 for you however you should be able to port or re-capture your PD.....
Again talk to a lawyer or post in the lawyer portal.........
best of luck
Uthar
11-01 10:15 PM
Hey there,
I thought your second version was improved a fair bit, it's nice to have some additional colours and gradient blends to act as a background for your image.
lata,
Uth :nerd:
I thought your second version was improved a fair bit, it's nice to have some additional colours and gradient blends to act as a background for your image.
lata,
Uth :nerd:
more...
arnet
11-22 06:31 PM
hey nivasch, can you use H1 to work if you didnt use it to enter at port of entry? can you please explain your experience? thanks.
Arnet
Arnet
2010 tiesto wallpapers. tiesto
gccovet
04-01 01:25 PM
Please update your profile.
GCCovet
GCCovet
more...
bobzibub
02-09 01:10 PM
How many words?
What specific subject/legislation?
What is IV's official position on it?
Cheers,
-b
PS: You know that Power = IV right? = )
What specific subject/legislation?
What is IV's official position on it?
Cheers,
-b
PS: You know that Power = IV right? = )
hair tiesto wallpapers.
apb
08-08 01:23 PM
Does arrest for driving with suspended license (License suspended for non payment of ticket) come under traffic violation? Any insight would be much appreciated.
more...
fearonlygod
11-13 08:44 PM
Hi Guys,
My previous employer has withheld my salary without any reaon..even though i gave app notice, abided with policies and had no bond or anything.
He is not paying my final paycheck since quite a few months and when i call earlier he used to say he will pay but now started like dont call me i will give when i have time......
If i complain to DOL wether i have to fill WH4 or state DOL wahe and Hour form...and would this processs has any effect on GC processing when i start or any repuircussions...as for proof of non payment of salary i have all timesshetss, refernce letters and His mails also
Please Sugest
My previous employer has withheld my salary without any reaon..even though i gave app notice, abided with policies and had no bond or anything.
He is not paying my final paycheck since quite a few months and when i call earlier he used to say he will pay but now started like dont call me i will give when i have time......
If i complain to DOL wether i have to fill WH4 or state DOL wahe and Hour form...and would this processs has any effect on GC processing when i start or any repuircussions...as for proof of non payment of salary i have all timesshetss, refernce letters and His mails also
Please Sugest
hot Tiesto Wallpaper Image
snhn
12-13 09:13 AM
From Austin. In for whatever. Let me know How can I be helpful
more...
house Tiesto wallpaper Image
arikris
02-08 11:22 PM
@sduddukuri - Can you share why H4 was denied in the first place? I am in a similar situation and wondering if MTR or Travel abroad would be better.
tattoo tiesto logo wallpaper
pbojja
08-15 03:39 PM
My I140 is approved on 12th August . Looks like they found the transfered files atlast.
more...
pictures tiesto wallpapers.
SeanDell
05-29 01:40 PM
?....
dresses Tiesto Wallpaper Images: Dj
ak_manu
04-02 11:51 AM
I got exact query.
All you need is Affidavits from you Father, Mother and any other close relative. Ask them to go to your local court house. There will be people sitting there who do prepare affidavits and notarize them. They need to do it on 10 Rupees stamp paper and get it notarized. They shall have the date of birth affidavit template at court house.
Once they have them, ask them to scan and send them to you to save time. Also ask them to DHL the originals so that you could recieve in 2 or 3days.
All you need is Affidavits from you Father, Mother and any other close relative. Ask them to go to your local court house. There will be people sitting there who do prepare affidavits and notarize them. They need to do it on 10 Rupees stamp paper and get it notarized. They shall have the date of birth affidavit template at court house.
Once they have them, ask them to scan and send them to you to save time. Also ask them to DHL the originals so that you could recieve in 2 or 3days.
more...
makeup Tiesto Celebrities
Hermione
09-25 01:15 PM
Take an infopass appointment and talk to an officer. There have been rumors that you may get the answer over the phone, but I never experienced it.
girlfriend Dj-tiesto-mobile-wallpaper
Legal_In_A_Limbo
04-28 08:27 PM
If you dont mind, can you keep us updated.
I will really appreciate that.
I will really appreciate that.
hairstyles tiesto wallpapers. dj tiesto
dixie
09-25 02:38 PM
I see no harm in contacting him; but your excitement about Chandrasekharan seems curious to me. When people who have themselves immigrated from India (who now have GC/citizenship) are so indifferent about us, how can you expect a second generation indian journalist to "understand" our problems ? He does not seem to have done any articles on immigration; so there is no objective way for us to say whether he is really sympathetic to us or not.
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
Any comments from Core Team regarding contacting Rajiv ? His parents are immigrants from India,so he will understand the sufferings of legal immigrants !
I think it is better to contact him.
Guys...Any comments ?
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
Any comments from Core Team regarding contacting Rajiv ? His parents are immigrants from India,so he will understand the sufferings of legal immigrants !
I think it is better to contact him.
Guys...Any comments ?
camarasa
07-13 06:22 PM
Why does everyone think it can only be something that the USCIS has the power/authority to act on by themselves. It's been almost two weeks since this fiasco started and they may have been meeting with the right people to put something together.
newuser
10-05 10:50 AM
Its probably a planned leak by the Obama Administration to the press to placate the hispanic lobby. Just chill... nothing's gonna happen.
Its a ploy to keep the immigration community at peace. I don't have high hopes for CIR until 2011. One thing we can keep doing is meeting the lawmakers and making them aware of the issues facing High Skilled Immigrants.
Its a ploy to keep the immigration community at peace. I don't have high hopes for CIR until 2011. One thing we can keep doing is meeting the lawmakers and making them aware of the issues facing High Skilled Immigrants.